the true about Mountain Lion 10.8 DP2 at moment i hope
ok, this hard to me to write all this, i love apple, but i been testing Mountain Lion since the first Demo was out, and to be honest is really stressful to work with it.... safari crash every time, the boot takes too much time to charge since im using this developer previews my machine has crash like 8 times when i was browsing the web and i was only doing that at moment a force power off was needed and i see the cpu is almost every time up from 50% is use and i have a mac mini 2010 coreduo 2.4ghz with 8gb of ram.... so at moment Mountain Lion is bullshit is horrible to work with that... looks awesome, the notifications center is nice but the system is very unstable i will back to snow leopard AGAIN because moved back to snow when i was testing Lion who was so disappointing too... i dont really know what the fuck is wrong with apple but if this continues like this OSX going to be the worst OS to work ever!
how to restore the old iPhone Classic with 3.1.3
yesterday i decided to restore my old iPhone classic with the 3.1.3 and of course was a lottle difficult to search and find the tools... because i dont have it with the official sim card...
so, stop searching, all you need is the next:
- ireb rc5 (find at his official site)
- custom firmware 3.1.3 already activated and jailbreaked
- itunes 10.5 "last one is working good"
note: while itunes is restoring it takes a long time to start and finish, you must wait around 40 minutes before it start to installing the firm so just wait and wait....
just follow the steps and enjoy your iPhone activated, unlocked and jailbreked
so, stop searching, all you need is the next:
- ireb rc5 (find at his official site)
- custom firmware 3.1.3 already activated and jailbreaked
- itunes 10.5 "last one is working good"
note: while itunes is restoring it takes a long time to start and finish, you must wait around 40 minutes before it start to installing the firm so just wait and wait....
just follow the steps and enjoy your iPhone activated, unlocked and jailbreked
Official iOS Firmwares
Here is the complete list of all Firmwares of iOS at moment... Download by the next links official by apple.
Future Firmware releases will be added as they come out.
Future Firmware releases will be added as they come out.
Hackintosh CORE i5 best hardware and tutorial
Hackintosh Tutorial: OS X Lion Installation / Upgrade
Hardware Used:
Intel 2500k Sandy Bridge Core i5
Gigabyte Z68X UD3H B3
Sapphire Radeon HD 6870 1GB
Scythe Shuriken B Cooler
Western Digital 1TB HDD 7200 RPM
Antec 650W PSU
12GB DDR3 1333 MHZ RAM
Generic Bluetooth USB Dongle
Logitech MX518
In this tutorial, I explain how to pick the right hardware for a hackintosh system.
I then demonstrate how to install OS X:
First, I install OS X Snow Leopard, then carefully upgrade and patch it to its latest version. Next, I install OS X Lion and upgrade to its latest version.
During the installation I use files from http://tonymacx86.com including: iBoot, MultiBeast, Bridge Helper and DSDT patch.
After a successful installation, I make a clone of the hard disk with Carbon Copy Cloner. Then, I attempt to overclock my unlocked CPU in Gigabyte's BIOS and run Geekbench in OS X to confirm the performance boost.
Afterwards, I talk a little about using the integrated Intel HD 3000 graphics.
This tutorial is suitable for anyone who is considering building a hackintosh PC, but would like to see the process unfold in a step-by-step fashion. Although this installation guide goes over many details, it does gloss over a few parts. Visit Tonymacx86.com to get more information on building a hackintosh and installing OS X Lion.
Hardware Used:
Intel 2500k Sandy Bridge Core i5
Gigabyte Z68X UD3H B3
Sapphire Radeon HD 6870 1GB
Scythe Shuriken B Cooler
Western Digital 1TB HDD 7200 RPM
Antec 650W PSU
12GB DDR3 1333 MHZ RAM
Generic Bluetooth USB Dongle
Logitech MX518
In this tutorial, I explain how to pick the right hardware for a hackintosh system.
I then demonstrate how to install OS X:
First, I install OS X Snow Leopard, then carefully upgrade and patch it to its latest version. Next, I install OS X Lion and upgrade to its latest version.
During the installation I use files from http://tonymacx86.com including: iBoot, MultiBeast, Bridge Helper and DSDT patch.
After a successful installation, I make a clone of the hard disk with Carbon Copy Cloner. Then, I attempt to overclock my unlocked CPU in Gigabyte's BIOS and run Geekbench in OS X to confirm the performance boost.
Afterwards, I talk a little about using the integrated Intel HD 3000 graphics.
This tutorial is suitable for anyone who is considering building a hackintosh PC, but would like to see the process unfold in a step-by-step fashion. Although this installation guide goes over many details, it does gloss over a few parts. Visit Tonymacx86.com to get more information on building a hackintosh and installing OS X Lion.
hackintosh en cq40-320la
Compaq CQ40 320 LA Mac OS X 10.5.8 Leopard
Hola Amigos de Taringa, En este Primer Post espero poder explicar de una manera sencilla como lograr tener al 99% Mac OS X Leopard en Una Laptop Compaq CQ 40-320 LA
Que Necesitamos :
1. iATKOS V 7 DVD 10.5.7 : Descargenlo desde Torrent Es mas sencillo http://thepiratebay.org/torrent/5129983/iATKOS_V7_10.5.7_DVD_for_Intel_AMD_reupload
2. iDeneb Combo Update 10.5.8
http://www.megaupload.com/?d=PU0J0ZZS
3. Driver Pack Creado Por Mi: Si el Link Muere me avisan
http://www.4shared.com/file/IwsZ1MQO/Drivers_Pack_CQ40-320LA_Mac_OS.html
4. Paciencia y muchas ganas de tener un HackBook
Paso A Paso
Instalamos Con las Siguientes Opciones
link: http://www.youtube.com/watch?v=yRisB8xLGdQ
Cuando Terminemos la Instalacion nos aparece un asistente, llenamos todos los datos
Nota: Tienen el WIFI 100% Funcional pero la luz del boton se queda en color rojo permanentemente
Al Finalizar Simplemente Iniciamos la instalacion del iDeneb Combo Update
Cuando Terminemos la instalacion reiniciamos y booteamos en modo Ingone Cache (Cuando aparece la manzanita y el camaleon damos flecha abajo dos veces y ahy esta la opcion Boot Ignore Cache y damos enter)
Despues de Esto podemos instalar los drivers Que estan en el paquete subido por mi, las instrucciones estan en el interior del paquete
Mac OSX En español
Seleccionamos el Lenguaje Español y lo arrastramos a la primera posicion
Al Finalizar y si todo salio bien tendran algo como esto
Gracias Por pasar por mi Primer Post
KmoRope -Hackintosh User 2010
Hola Amigos de Taringa, En este Primer Post espero poder explicar de una manera sencilla como lograr tener al 99% Mac OS X Leopard en Una Laptop Compaq CQ 40-320 LA
Que Necesitamos :
1. iATKOS V 7 DVD 10.5.7 : Descargenlo desde Torrent Es mas sencillo http://thepiratebay.org/torrent/5129983/iATKOS_V7_10.5.7_DVD_for_Intel_AMD_reupload
2. iDeneb Combo Update 10.5.8
http://www.megaupload.com/?d=PU0J0ZZS
3. Driver Pack Creado Por Mi: Si el Link Muere me avisan
http://www.4shared.com/file/IwsZ1MQO/Drivers_Pack_CQ40-320LA_Mac_OS.html
4. Paciencia y muchas ganas de tener un HackBook
Paso A Paso
Instalamos Con las Siguientes Opciones
link: http://www.youtube.com/watch?v=yRisB8xLGdQ
Cuando Terminemos la Instalacion nos aparece un asistente, llenamos todos los datos
Nota: Tienen el WIFI 100% Funcional pero la luz del boton se queda en color rojo permanentemente
Al Finalizar Simplemente Iniciamos la instalacion del iDeneb Combo Update
Cuando Terminemos la instalacion reiniciamos y booteamos en modo Ingone Cache (Cuando aparece la manzanita y el camaleon damos flecha abajo dos veces y ahy esta la opcion Boot Ignore Cache y damos enter)
Despues de Esto podemos instalar los drivers Que estan en el paquete subido por mi, las instrucciones estan en el interior del paquete
Mac OSX En español
Seleccionamos el Lenguaje Español y lo arrastramos a la primera posicion
Al Finalizar y si todo salio bien tendran algo como esto
Gracias Por pasar por mi Primer Post
KmoRope -Hackintosh User 2010
best motherboard for hackintosh
BIOSTAR G31-M7 TE Mac OS X 10.5.6 How to hackintosh g31
Hello everyone i would like to contribute something to hackintosh community. I saw few forum posts about this cheap BIOSTAR board which i use, this board is used worldwide
and i must say its very compatible board, you cant use it for RETAIL installation but it works very well after patches. This step by step �quest� can be used on more boards but for this one specific.
I found many solutions for my hackintosh on this board so i want to share some of my �knowlege� for this mobo, i would like to install 10.4 Tiger to my PC but i dont know how to do it if anyone can help me.. please msg me.. dont know any 10.4 OSX with EFI.
PREPARATION PHASE
Before we do anything we must gather few things:
We need some time
We need iPC Mac OS X Universal (don�t know real full name)
1st STEP (BIOS SETTINGS)
Since i tryed to install Mac OS X 10.5.6 on this board many times i know exact combinations and fixes to get it work so we must DISABLE 2 things in BIOS before we start. If we do not disable them we wont be able to boot Mac OS X.
So i wont provide any pictures you guys will have to find them so:
1.Disable EHCI (set it to �disabled� its right down under USB Legacy support)
2.Disable Speedstep its under CPU settings.
Now save and exit bios, you are ready to go.
2nd STEP (SETUP BOOT)
Now you can put your iPC Mac OS X in your DVD drive and before setup press F8
and type:
cpus=1 -v
-Now we are booting.. it takes same time boot but it will..
After you enter setup i suppose most of people here know how to use disk utility so start that application from menu and (know its up to you - i have 250 GB hard drive and i format it in 2 Mac Os Journaled partitions) format your hard drive to Mac OS Journaled.
-Now select 1 of them for installation and move to next screen.
-Now do not click INSTALL yet but click customise to add some fixes and drivers and choose:
VIDEO: nvinject or nvdarwin with amount of memory your graphics card have (just one of them)
SOUND: under submenu OTHER choose Azalia audio (it works)
CHIPSET: You need ICH 7 fix so choose that one (i think its 1st on menu selection sorry i dont know full name im writing this manual from my head without any preparation)
KERNEL (if you have Intel processor DONT choose anything becouse you will go with default Vanilla kernel if you are AMD user GOOD LUCK!! with Voodoo you may have issues later with DSDT)
ETHERNET (Dont choose anything you need RTL8168B and RTL8101E driver for MacOS on intel-based MAC you can download that from Realtek website and install later with OSXtools or Kext Helper)
Now most important: FIXES submenu: choose ACPI Fix (because without that you will have problem with Using 10485 buffers... ) also there is Time Machine Legacy FIX if its not under FIXES submenu find it you need it checked also.
Applications submenu: you need: EFI Studio, OSX Tools, DSDT patcher GUI ...
THATS IT! Thats all you need to select
Now you can go and click INSTALL... (skip DVD check its useless) after 20-30 minutes of installation you are about to restart, you click restart remove your DVD drive and before you BOOT your Mac os X from hard drive for the first time press F8 on your Chameleon bootloader and again type:
cpus=1 -v
3rd STEP (1st BOOT After installation)
Then press enter and boot it should work .. you see nice Welcome Movie with sound (quality of movie depends if you have selected right Video injector and it should work fine)
By now you should see Finder, Dock and all... go to Applications and find tool named DSDT patcher GUI
Run that App (small window apper) from the left side check radio button Mac OS X
and from the right side choose to apply to your Mac hard drive and confirm that, you should recieve on screen something like Success ... 71 fixes.... applied..
Now you can restart your mac and you will have both CPU cores working.
TIPS:
-You can fix your About this mac with OSXTOOLS
-If you have blue screen with screen resolution changing its possible that if your monitor
cable uses VGA connector get yourself DVI-VGA switch it will do.
FUENTE:
http://www.insanelymac.com/forum/index.php?showtopic=172062
Hello everyone i would like to contribute something to hackintosh community. I saw few forum posts about this cheap BIOSTAR board which i use, this board is used worldwide
and i must say its very compatible board, you cant use it for RETAIL installation but it works very well after patches. This step by step �quest� can be used on more boards but for this one specific.
I found many solutions for my hackintosh on this board so i want to share some of my �knowlege� for this mobo, i would like to install 10.4 Tiger to my PC but i dont know how to do it if anyone can help me.. please msg me.. dont know any 10.4 OSX with EFI.
PREPARATION PHASE
Before we do anything we must gather few things:
We need some time
We need iPC Mac OS X Universal (don�t know real full name)
1st STEP (BIOS SETTINGS)
Since i tryed to install Mac OS X 10.5.6 on this board many times i know exact combinations and fixes to get it work so we must DISABLE 2 things in BIOS before we start. If we do not disable them we wont be able to boot Mac OS X.
So i wont provide any pictures you guys will have to find them so:
1.Disable EHCI (set it to �disabled� its right down under USB Legacy support)
2.Disable Speedstep its under CPU settings.
Now save and exit bios, you are ready to go.
2nd STEP (SETUP BOOT)
Now you can put your iPC Mac OS X in your DVD drive and before setup press F8
and type:
cpus=1 -v
-Now we are booting.. it takes same time boot but it will..
After you enter setup i suppose most of people here know how to use disk utility so start that application from menu and (know its up to you - i have 250 GB hard drive and i format it in 2 Mac Os Journaled partitions) format your hard drive to Mac OS Journaled.
-Now select 1 of them for installation and move to next screen.
-Now do not click INSTALL yet but click customise to add some fixes and drivers and choose:
VIDEO: nvinject or nvdarwin with amount of memory your graphics card have (just one of them)
SOUND: under submenu OTHER choose Azalia audio (it works)
CHIPSET: You need ICH 7 fix so choose that one (i think its 1st on menu selection sorry i dont know full name im writing this manual from my head without any preparation)
KERNEL (if you have Intel processor DONT choose anything becouse you will go with default Vanilla kernel if you are AMD user GOOD LUCK!! with Voodoo you may have issues later with DSDT)
ETHERNET (Dont choose anything you need RTL8168B and RTL8101E driver for MacOS on intel-based MAC you can download that from Realtek website and install later with OSXtools or Kext Helper)
Now most important: FIXES submenu: choose ACPI Fix (because without that you will have problem with Using 10485 buffers... ) also there is Time Machine Legacy FIX if its not under FIXES submenu find it you need it checked also.
Applications submenu: you need: EFI Studio, OSX Tools, DSDT patcher GUI ...
THATS IT! Thats all you need to select
Now you can go and click INSTALL... (skip DVD check its useless) after 20-30 minutes of installation you are about to restart, you click restart remove your DVD drive and before you BOOT your Mac os X from hard drive for the first time press F8 on your Chameleon bootloader and again type:
cpus=1 -v
3rd STEP (1st BOOT After installation)
Then press enter and boot it should work .. you see nice Welcome Movie with sound (quality of movie depends if you have selected right Video injector and it should work fine)
By now you should see Finder, Dock and all... go to Applications and find tool named DSDT patcher GUI
Run that App (small window apper) from the left side check radio button Mac OS X
and from the right side choose to apply to your Mac hard drive and confirm that, you should recieve on screen something like Success ... 71 fixes.... applied..
Now you can restart your mac and you will have both CPU cores working.
TIPS:
-You can fix your About this mac with OSXTOOLS
-If you have blue screen with screen resolution changing its possible that if your monitor
cable uses VGA connector get yourself DVI-VGA switch it will do.
FUENTE:
http://www.insanelymac.com/forum/index.php?showtopic=172062
join and split files in OSX, mountain lion compatible
COMO PARTIR Y JUNTAR ARCHIVOS LARGOS EN MAC OS X
SI TE TOPASTE CON ALGUN ARCHIVO PARTIDO CON CONCAT SEGURAMENTE NO HABRAS HAYADO COMO UNIRLO EN MAC OS X
AQUI TE DEJO EL LINK PARA QUE TE LO BAJES Y UNAS ESOS ARCHIVOS PARA OBTENER EL ARCHIVO USABLE QUE SEGURAMENTE NECESTIAS USARLO ES FACIL SOLO PUYAS UN BOTON, BUSCAS EL PRIMER ARCHIVO, ESPERAS EL PROCESO Y LISTO...
DESCARGA:
http://www.xs4all.nl/~loekjehe/Split&Concat/
ACTIVAR FIREWALL EN MAC OS X
- haz click en la manzana de la barra superior
- ahora ve hacia "preferencias del sistema"
- da click en "seguridad"
- busca la pestana de "firewall"
- actva el firewall y listo, el firewall ya esta activado... "en el caso de leopard el firewall no es muy bueno y aveces siempre deja entrar algunos softwares, recomiendo actualizar a snow leopard si no quieres estar perdiendo el cabello cada vez que tendras problemas con el firewall de leopard..."
ahora cuando habras X aplicacion la primera vez, el programa te pedira si deseas PERMITIR o DENEGAR conexion a internet dicha aplicacion... si se trata del cs4 por ejemplo tienes que darle DENEGAR para que el serial introducido no caduque y asi no tengas que estar insertando nuevas claves cada vez que habras cs4... y lo mismo con otros programas que no desees tengan acceso a internet....
- ahora ve hacia "preferencias del sistema"
- da click en "seguridad"
- busca la pestana de "firewall"
- actva el firewall y listo, el firewall ya esta activado... "en el caso de leopard el firewall no es muy bueno y aveces siempre deja entrar algunos softwares, recomiendo actualizar a snow leopard si no quieres estar perdiendo el cabello cada vez que tendras problemas con el firewall de leopard..."
ahora cuando habras X aplicacion la primera vez, el programa te pedira si deseas PERMITIR o DENEGAR conexion a internet dicha aplicacion... si se trata del cs4 por ejemplo tienes que darle DENEGAR para que el serial introducido no caduque y asi no tengas que estar insertando nuevas claves cada vez que habras cs4... y lo mismo con otros programas que no desees tengan acceso a internet....
Hackintosh en HP MINI 110-1020LA
/// Introducción
Esta guía le guiará a través de la instalación de OS X utilizando iDeneb 1.3. Hay otros
guías que muestran cómo instalar con el oficial de Apple Mac OS X Leopard
discos, pero esta guía no está relacionado. Con eso dicho, vamos a dar vuelta a su 110 en un
Hackintosh ultra-portátil!
/// Cosas que necesitará:
- Un HP / Compaq Mini 110-netbook serie con al menos 16 GB o más de espacio en disco
disponible. Nota: asegúrese de que la versión de BIOS es la versión 0.5 o superior.
- un lector de discos externos
- Un ratón USB (necesario hasta que se instalen los kexts trackpad.)
- el disco instalador del hackintosh el cual supongo ya esta en tus manos
- El pack de drivers "HP Mini OS X archivos esenciales", que se encuentra aquí: http://www.mediafire.com/download.php?djo0kimmyay
/// PASOS ///
1. conectar tu lector externo, introducir el disco, al encender la maquina presiona F9, inicia el hackintosh (si este se traba o se reinicia deja que el conteo regresivo pase y cuando te salga la linea de comandos para escribir, digita lo siguiente: cpus=1 y ahora no deberas tener problemas para inciar el instalador)
2. notaras que la resolucion de la pantalla no es la adecuada todo se ve enorme y los botones para continuar no se alcanzan a mostrar, al cargar el instalador te preguntara que idioma deseas, elije tu idioma y dale doble click
3. ahora ya estamos adentro en el instalador, ve a herramientas y elije UTILIDAD DE DISCOS, ahi formatea tu disco duro o la particion que creaste en la cual deseas tener el mac os x, formatealo como mac os plus con registro y cierra utilidad de discos al terminar..
4. ahora estamos en la portada de bienvenido pero no se logra mostrar el cuadro de continuar, presiona 2 veces TAB y preciona la tecla e espacio par dar click en siguiente. haz click en acpetar en el cuadro de dialogo que te aparecera
5. luego selecciona el hdd para instalar el mac os x, luego de seleccionarlo preciona 3 veces TAB y luego espaciadora para dar click en el cuadro y seleccionar nuestros drivers..
6. en el cuadro de drivers busca y selecciona lo sigueinte: ACPI, CPU, and Firewire Removal, ICHx Fix, idioma espanol... no selecciones nada mas y haz click en aceptar... al regresar al cuadro donde seleccionas el hdd selecciona nuevamente el disco y preciona 2 veces TAB y espaciadora para comenzar a instalacion, luego te saldra un cuadro que dice esta comprobando el disco haz click en omitir y espera que termine la instalacion...
al reiniciar no dejes que entre aun al mac os x pues recuerda hay problemas con el driver de video, al inciar notaras que hay un conteo en regresivo presiona enter para cancelar y aparecera una linea para escribir comandos ahi haz lo siguiente:
A TRADUCIR CON GOOGLE O SI SABES INGLES MUCHO MEJOR, SUERTE!!!
12. The install should then proceed. After sitting at the install screen for a while, your computer will automatically reboot. If you let it go, it will tell you migration assistant cannot run due to the screen size and then it will continue to load OS X. You do not want this to happen, So hit Enter as soon as the boot loader appears and starts counting down.
13. Once you’ve hit Enter, you’ll be able to enter a command. Enter “-s” without quotes and hit Enter once again.
14. Wait for all the text to skim by until it stops. Then, type “/sbin/fsck –fy” without quotes and press Enter.
15. Once it says “File System was modified.” Type “/sbin/mount –uw /” without quotes, but with the spaces.
16. Next, type in “passwd root” without quotes. Hit Enter.
17. Now, type in whatever password you’d like, twice; pressing Enter after each time.
18. Then, type ”touch /var/db/.AppleSetupDone” being sure not to forget the . or the Caps. Exclude the quotation marks once again.
19. Now, type “reboot” without quotes and press Enter.
20. Your Mini will now reboot and OS X will load.
Ok, we now have OS X installed on our Mini 110! Mind you, it is still a rough, caveman-like installation. Now we need to install all of the other essentials that will make our Mini Hackintosh run as smooth as, well, a Mac!
Installing Kernel Extensions
Now that OS X has booted, you will now be prompted for a username and a password. User name is “root” without quotes, and the password is whatever you set it to during part 16 above. Now, you should be in OS X. (w00t!)
Click “System Preferences” in your dock. It’s the gray icon and looks like gears in a box.
Click “Accounts”.
To the far left, there is a “+” sign. Click on it.
In the username box, type in whatever you’d like, but DO NOT set a password.
Under “New Account” it should say Standard, but click the drop-down and choose Administrator.
Click “Create Account”. It will prompt you asking if it’s OK to not have a password. Click “OK”.
Under the list of accounts to the left, click “Login Options”.
Under “Automatic Login”, select the new account you just made.
Reboot your Mini.
You should now be in OS X again, but this time you’ll be under the account you just created instead of the “root” account.
Find your HP Mini Essentials .zip file that we have already downloaded and have on our flash drives/CDs (right?) and go ahead and unzip it to your OS X desktop. Inside the HP Mini Essential Files folder, open up the UInstaller folder, and open the UInstaller app.
Select your hard drive under Drives.
Choose Osx86_Essentials as the package to install
Click “Apply kext package”
Click “Install PC_EFI v9 Chameleon Edition 1.0.12”
Click “Install”
Now, let’s go ahead and apply the DST Patcher to get ready to update to 10.5.7. Open up the HP Mini Essential Files folder again, go into DSTPatcherGUI folder, and open up DST Patcher GUI app.
Select “Darwin/Mac OS X”
Select “New HPET Option”
Select “Apply DSDT Patch to:”
Select your hard drive.
Now, let’s get our WiFi and other fun stuff working. Back in our HP Mini Essential Files folder, go into the OSX86Tools_1.0.150 folder, and open the OSX86Tools app.
In OSX86Tools, click on “Repair Permissions”, then click the button to perform the select action.
Click on “Install kexts” towards the bottom right.
Find the kexts folder on your flash drive. Select the THIRD (excluding AppleGMA950.kext and AppleINtegratedFramebuffer.kext) kext file.
Shift+Click the last one to select all (excluding the two previously mentioned.)
After the installer completes, it will ask you to reboot. Just click “OK” and “Cancel” on any dialog boxes that appear.
Now most of our kexts are installed for your Mini. If you were wondering what kexts are, they are similar to device drivers on Windows, just Mac-style.
Update to Mac OS X 10.5.8 or 10.5.8
Updated September 21, 2009: There are many people that successfully installed Mac OS X 10.5.8 software update with no issues including myself so I am now recommending that you choose to install 10.5.8 instead of 10.5.7, but I will leave the 10.5.7 route still listed below.
Download the 10.5.7 Combo Update from Apple’s website here: http://support.apple.com/downloads/DL866/en_US/MacOSXUpdCombo10.5.8.dmg
Double-click it to mount the disk image.
Run the Updater by double-clicking it.
Go through all the prompts. It will start the installation process. It will reboot twice.
If all went well, you will be in OS X after rebooting itself a few times. Be patient. If not, you’ll be sitting at the Apple boot logo for a while wishing you had followed the guide more closely. If it fails, you will have to do a complete reinstall. Start from Step 1, under “Installation”.
If you are in OS X, congratulations! Time to get out the USB Mouse that was listed under “Things You’ll Need”. Now we need to get your trackpad and keyboard properly installed.
Mouse and Keyboard Fix
Plug in the USB mouse you have and be thankful you listened to the guide and did not set a password for your user account. If you did, you better be plugging in a USB keyboard as well.
First, run the VooDooPS2 Controller package (VoodooPS2Controller-0.98-installer.pkg) found in the HP Mini Essential Files folder. When prompted, make sure to check that box that says trackpad. Go through all the prompts until it’s installed.
Reboot.
Now that we have a fully working trackpad and keyboard, we need to reinstall all the kexts. Open up OSX86Tools again (HP Mini Essential Files > OSX86Tools_1.0.150 > OSX86Tools.app ) and reinstall all the kexts in the kext folder.
Click on “Install kexts” towards the bottom right.
Find the kexts folder on your flash drive. Select the first one. This time, select all but one kext – Do not install the AppleIntelGMA950 kext. It will disable your screen.
Shift+Click the last one to select all.
After the installer completes, it will ask you to reboot. Go ahead and reboot.
Now that we have rebooted, again, and we are back into OS X, again, we need to enable Quartz. What is Quartz, you ask? Quartz is an essential part of the graphics system in Mac OS X. Quartz is partially based on the Portable Document Format (PDF) standard, and allows anti-aliasing, rendering, and compositing of PostScript graphics. Quartz also draws the Aqua user interface.
Enabling Quartz
To enable Quartz, open OX86 Tools and click the Enable/Disable Quartz GL button. It will tell you the current status. If disabled, feel free to enable it by clicking the button that says “Enable Quartz GL”.
Fixing the CPU to Allow Dual-Core Processing
If you start Activity Monitor before doing this, you will see that OS X only sees one processor (press the CPU tab below the process list.) To allow it to use the second core, do the following:
Log in as the Administrator. (Log out of your current user, then select “Other” at the login screen and type in username “root” without quotes, and the password you entered for it earlier in the installation.)
Go to Finder and select the drive you installed OS X on and direct yourself to library/preferences/systemconfigration
Select the file “com.apple.boot.plist” without quotes. Right click and Copy the file.
Paste it somewhere else, like the Desktop, as a back up copy.
Open the original “com.apple.boot.plist” file with the text editor (the default program) and select where it says something like “cpu=1 –f” and change the number 1 to the number 2, so that it reads “cpu=2 –f”
Save the file, then reboot the Mini. Again.
Now, we can enable Quartz Exteme!
Enable Quartz Extreme (10.5.7 and above)
Download these kexts: http://www.mediafire.com/download.php?yohk3zyzwyg and extract the contents of the .zip file to your desktop.
Go into OSX86 Tools (HP Mini Essential Files > OSX86Tools_1.0.150 > OSX86Tools.app ), and select “Install Kexts”.
Browse to your download location, and install all of those kexts.
Once it is done installing, it will ask you to reboot.
To avoid problems, chose “Cancel” and stay in OSX86 Tools.
Go ahead and repair permissions. Be prepared for this to take a while, so don’t get worried if it does. It is normal.
Reboot when the permissions have been repaired.
end...
fuente: http://osxhpmini.info/os-x-install-guide/
Esta guía le guiará a través de la instalación de OS X utilizando iDeneb 1.3. Hay otros
guías que muestran cómo instalar con el oficial de Apple Mac OS X Leopard
discos, pero esta guía no está relacionado. Con eso dicho, vamos a dar vuelta a su 110 en un
Hackintosh ultra-portátil!
/// Cosas que necesitará:
- Un HP / Compaq Mini 110-netbook serie con al menos 16 GB o más de espacio en disco
disponible. Nota: asegúrese de que la versión de BIOS es la versión 0.5 o superior.
- un lector de discos externos
- Un ratón USB (necesario hasta que se instalen los kexts trackpad.)
- el disco instalador del hackintosh el cual supongo ya esta en tus manos
- El pack de drivers "HP Mini OS X archivos esenciales", que se encuentra aquí: http://www.mediafire.com/download.php?djo0kimmyay
/// PASOS ///
1. conectar tu lector externo, introducir el disco, al encender la maquina presiona F9, inicia el hackintosh (si este se traba o se reinicia deja que el conteo regresivo pase y cuando te salga la linea de comandos para escribir, digita lo siguiente: cpus=1 y ahora no deberas tener problemas para inciar el instalador)
2. notaras que la resolucion de la pantalla no es la adecuada todo se ve enorme y los botones para continuar no se alcanzan a mostrar, al cargar el instalador te preguntara que idioma deseas, elije tu idioma y dale doble click
3. ahora ya estamos adentro en el instalador, ve a herramientas y elije UTILIDAD DE DISCOS, ahi formatea tu disco duro o la particion que creaste en la cual deseas tener el mac os x, formatealo como mac os plus con registro y cierra utilidad de discos al terminar..
4. ahora estamos en la portada de bienvenido pero no se logra mostrar el cuadro de continuar, presiona 2 veces TAB y preciona la tecla e espacio par dar click en siguiente. haz click en acpetar en el cuadro de dialogo que te aparecera
5. luego selecciona el hdd para instalar el mac os x, luego de seleccionarlo preciona 3 veces TAB y luego espaciadora para dar click en el cuadro y seleccionar nuestros drivers..
6. en el cuadro de drivers busca y selecciona lo sigueinte: ACPI, CPU, and Firewire Removal, ICHx Fix, idioma espanol... no selecciones nada mas y haz click en aceptar... al regresar al cuadro donde seleccionas el hdd selecciona nuevamente el disco y preciona 2 veces TAB y espaciadora para comenzar a instalacion, luego te saldra un cuadro que dice esta comprobando el disco haz click en omitir y espera que termine la instalacion...
al reiniciar no dejes que entre aun al mac os x pues recuerda hay problemas con el driver de video, al inciar notaras que hay un conteo en regresivo presiona enter para cancelar y aparecera una linea para escribir comandos ahi haz lo siguiente:
A TRADUCIR CON GOOGLE O SI SABES INGLES MUCHO MEJOR, SUERTE!!!
12. The install should then proceed. After sitting at the install screen for a while, your computer will automatically reboot. If you let it go, it will tell you migration assistant cannot run due to the screen size and then it will continue to load OS X. You do not want this to happen, So hit Enter as soon as the boot loader appears and starts counting down.
13. Once you’ve hit Enter, you’ll be able to enter a command. Enter “-s” without quotes and hit Enter once again.
14. Wait for all the text to skim by until it stops. Then, type “/sbin/fsck –fy” without quotes and press Enter.
15. Once it says “File System was modified.” Type “/sbin/mount –uw /” without quotes, but with the spaces.
16. Next, type in “passwd root” without quotes. Hit Enter.
17. Now, type in whatever password you’d like, twice; pressing Enter after each time.
18. Then, type ”touch /var/db/.AppleSetupDone” being sure not to forget the . or the Caps. Exclude the quotation marks once again.
19. Now, type “reboot” without quotes and press Enter.
20. Your Mini will now reboot and OS X will load.
Ok, we now have OS X installed on our Mini 110! Mind you, it is still a rough, caveman-like installation. Now we need to install all of the other essentials that will make our Mini Hackintosh run as smooth as, well, a Mac!
Installing Kernel Extensions
Now that OS X has booted, you will now be prompted for a username and a password. User name is “root” without quotes, and the password is whatever you set it to during part 16 above. Now, you should be in OS X. (w00t!)
Click “System Preferences” in your dock. It’s the gray icon and looks like gears in a box.
Click “Accounts”.
To the far left, there is a “+” sign. Click on it.
In the username box, type in whatever you’d like, but DO NOT set a password.
Under “New Account” it should say Standard, but click the drop-down and choose Administrator.
Click “Create Account”. It will prompt you asking if it’s OK to not have a password. Click “OK”.
Under the list of accounts to the left, click “Login Options”.
Under “Automatic Login”, select the new account you just made.
Reboot your Mini.
You should now be in OS X again, but this time you’ll be under the account you just created instead of the “root” account.
Find your HP Mini Essentials .zip file that we have already downloaded and have on our flash drives/CDs (right?) and go ahead and unzip it to your OS X desktop. Inside the HP Mini Essential Files folder, open up the UInstaller folder, and open the UInstaller app.
Select your hard drive under Drives.
Choose Osx86_Essentials as the package to install
Click “Apply kext package”
Click “Install PC_EFI v9 Chameleon Edition 1.0.12”
Click “Install”
Now, let’s go ahead and apply the DST Patcher to get ready to update to 10.5.7. Open up the HP Mini Essential Files folder again, go into DSTPatcherGUI folder, and open up DST Patcher GUI app.
Select “Darwin/Mac OS X”
Select “New HPET Option”
Select “Apply DSDT Patch to:”
Select your hard drive.
Now, let’s get our WiFi and other fun stuff working. Back in our HP Mini Essential Files folder, go into the OSX86Tools_1.0.150 folder, and open the OSX86Tools app.
In OSX86Tools, click on “Repair Permissions”, then click the button to perform the select action.
Click on “Install kexts” towards the bottom right.
Find the kexts folder on your flash drive. Select the THIRD (excluding AppleGMA950.kext and AppleINtegratedFramebuffer.kext) kext file.
Shift+Click the last one to select all (excluding the two previously mentioned.)
After the installer completes, it will ask you to reboot. Just click “OK” and “Cancel” on any dialog boxes that appear.
Now most of our kexts are installed for your Mini. If you were wondering what kexts are, they are similar to device drivers on Windows, just Mac-style.
Update to Mac OS X 10.5.8 or 10.5.8
Updated September 21, 2009: There are many people that successfully installed Mac OS X 10.5.8 software update with no issues including myself so I am now recommending that you choose to install 10.5.8 instead of 10.5.7, but I will leave the 10.5.7 route still listed below.
Download the 10.5.7 Combo Update from Apple’s website here: http://support.apple.com/downloads/DL866/en_US/MacOSXUpdCombo10.5.8.dmg
Double-click it to mount the disk image.
Run the Updater by double-clicking it.
Go through all the prompts. It will start the installation process. It will reboot twice.
If all went well, you will be in OS X after rebooting itself a few times. Be patient. If not, you’ll be sitting at the Apple boot logo for a while wishing you had followed the guide more closely. If it fails, you will have to do a complete reinstall. Start from Step 1, under “Installation”.
If you are in OS X, congratulations! Time to get out the USB Mouse that was listed under “Things You’ll Need”. Now we need to get your trackpad and keyboard properly installed.
Mouse and Keyboard Fix
Plug in the USB mouse you have and be thankful you listened to the guide and did not set a password for your user account. If you did, you better be plugging in a USB keyboard as well.
First, run the VooDooPS2 Controller package (VoodooPS2Controller-0.98-installer.pkg) found in the HP Mini Essential Files folder. When prompted, make sure to check that box that says trackpad. Go through all the prompts until it’s installed.
Reboot.
Now that we have a fully working trackpad and keyboard, we need to reinstall all the kexts. Open up OSX86Tools again (HP Mini Essential Files > OSX86Tools_1.0.150 > OSX86Tools.app ) and reinstall all the kexts in the kext folder.
Click on “Install kexts” towards the bottom right.
Find the kexts folder on your flash drive. Select the first one. This time, select all but one kext – Do not install the AppleIntelGMA950 kext. It will disable your screen.
Shift+Click the last one to select all.
After the installer completes, it will ask you to reboot. Go ahead and reboot.
Now that we have rebooted, again, and we are back into OS X, again, we need to enable Quartz. What is Quartz, you ask? Quartz is an essential part of the graphics system in Mac OS X. Quartz is partially based on the Portable Document Format (PDF) standard, and allows anti-aliasing, rendering, and compositing of PostScript graphics. Quartz also draws the Aqua user interface.
Enabling Quartz
To enable Quartz, open OX86 Tools and click the Enable/Disable Quartz GL button. It will tell you the current status. If disabled, feel free to enable it by clicking the button that says “Enable Quartz GL”.
Fixing the CPU to Allow Dual-Core Processing
If you start Activity Monitor before doing this, you will see that OS X only sees one processor (press the CPU tab below the process list.) To allow it to use the second core, do the following:
Log in as the Administrator. (Log out of your current user, then select “Other” at the login screen and type in username “root” without quotes, and the password you entered for it earlier in the installation.)
Go to Finder and select the drive you installed OS X on and direct yourself to library/preferences/systemconfigration
Select the file “com.apple.boot.plist” without quotes. Right click and Copy the file.
Paste it somewhere else, like the Desktop, as a back up copy.
Open the original “com.apple.boot.plist” file with the text editor (the default program) and select where it says something like “cpu=1 –f” and change the number 1 to the number 2, so that it reads “cpu=2 –f”
Save the file, then reboot the Mini. Again.
Now, we can enable Quartz Exteme!
Enable Quartz Extreme (10.5.7 and above)
Download these kexts: http://www.mediafire.com/download.php?yohk3zyzwyg and extract the contents of the .zip file to your desktop.
Go into OSX86 Tools (HP Mini Essential Files > OSX86Tools_1.0.150 > OSX86Tools.app ), and select “Install Kexts”.
Browse to your download location, and install all of those kexts.
Once it is done installing, it will ask you to reboot.
To avoid problems, chose “Cancel” and stay in OSX86 Tools.
Go ahead and repair permissions. Be prepared for this to take a while, so don’t get worried if it does. It is normal.
Reboot when the permissions have been repaired.
end...
fuente: http://osxhpmini.info/os-x-install-guide/